 |
|
|
|
| |
| Hardworking Hardware |
The track is 2 or 3" galvanized steel, depending on door size, with bracket mount for wood jambs or continuous reverse mounting for steel jambs. For angle-mount track, door widths are 2" wider than opening. Track rollers are 2 or 3" case-hardened inner and outer steel races with 10-ball, pre-lubricated bearings. Hinges, brackets, and reinforced struts are hot-dipped galvanized steel, and fasteners are plated for maximum corrosion resistance.
Counterbalancing springs are torsion type, computer calibrated to match door load. This provides a 10,000 cycle life at the minimum; optional spring wires can achieve 25,000, 50,000, and 100,000 cycle requirements. Springs are wound from oil-tempered wire and mounted on a continuous cross header tube or solid shaft, as determined by torque load. |
|
|
Haas
Door CHT-716
Commercial Insulated
Steel Doors
HAAS-THERM doors stand
up to the elements - insulating, dampening
noise, and enhancing your building's aesthetics
at the same time. These insulated steel doors
help increase energy savings with the polyurethane-foam
cores. |
 |
Download
Product PDF |
 |
763-504-5248 : Call us for a FREE estimate |
| |
Energy Efficiency |
| HAAS-THERM doors stand up to the elements - insulating, dampening noise, and enhancing your building's aesthetics at the same time. These insulated steel doors help increase energy savings with the polyurethane-foam cores. |
| HAAS-THERM doors are 1-3/4" thick. The R-Value for this product is 16.18. Rigid vinyl extrusions with positive thermal breaks are used to eliminate metal-to-metal contact, which limits the transfer of temperature. Tongue-and-groove construction and section joint seals at meeting rails provide optimum water and wind resistance. |
| A full-length, one-piece vinyl astragal retainer and flexible vinyl U-shaped weatherstrip prevents infiltration of air, rain, snow, and debris. The seal fits to irregular or unlevel floors and reduces impact shocks when the door is closed against concrete. |
 |
|
| Unique Paint System |
This three tier, corrosion-resistant protection is designed to repel even the most hostile weather conditions. The protective layers found on both the interior and exterior are:
1. Foam Injected Polyurethane
2. 26 gauge steel
3. Galvanizing
4. Epoxy Primer
5. Polyester Top Coat |
 |
|
| Exceptional Strength |
HAAS-THERM doors are built strong. The high-density CFC-free polyurethane foam expands and adheres to the interior and exterior steel panels to provide a rigid unitized structure.
Our doors are reinforced with roll-formed galvanized steel struts and double-end hinges, as required to meet all local windload specifications.
|
 |
|
| Panel Options |
|
Haas-Therm
CHT-710 |
Haas-Therm
CHT-716 |
Haas-Therm
CHT-732 |
Haas-Therm
CHT-780 |
Haas-Therm
CHT-790 |
|
|
 |
OFFICIAL
PRODUCT WEB SITE
|
|
|
|
|
